termux-setup-storage

cd ~/  
nano ../usr/etc/apache2/httpd.conf

apachectl start; termux-open http://127.0.0.1:8927/

DocumentRoot "/storage/emulated/0/localhost"

#  
# This is the main Apache HTTP server configuration file.  It contains the  
# configuration directives that give the server its instructions.  
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.  
# In particular, see   
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>  
# for a discussion of each configuration directive.  
#  
# Do NOT simply read the instructions in here without understanding  
# what they do.  They're here only as hints or reminders.  If you are unsure  
# consult the online docs. You have been warned.    
#  
# Configuration and logfile names: If the filenames you specify for many  
# of the server's control files begin with "/" (or "drive:/" for Win32), the  
# server will use that explicit path.  If the filenames do *not* begin  
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"  
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the  
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"   
# will be interpreted as '/logs/access_log'.  
  
#  
# ServerRoot: The top of the directory tree under which the server's  
# configuration, error, and log files are kept.  
#  
# Do not add a slash at the end of the directory path.  If you point  
# ServerRoot at a non-local disk, be sure to specify a local disk on the  
# Mutex directive, if file-based mutexes are used.  If you wish to share the  
# same ServerRoot for multiple httpd daemons, you will need to change at  
# least PidFile.  
#  
ServerRoot "/data/data/com.termux/files/usr"  
  
#  
# Mutex: Allows you to set the mutex mechanism and mutex file directory  
# for individual mutexes, or change the global defaults  
#  
# Uncomment and change the directory if mutexes are file-based and the default  
# mutex file directory is not on a local disk or is not appropriate for some  
# other reason.  
#  
# Mutex default:var/run/apache2  
  
#  
# Listen: Allows you to bind Apache to specific IP addresses and/or  
# ports, instead of the default. See also the <VirtualHost>  
# directive.  
#  
# Change this to Listen on specific IP addresses as shown below to   
# prevent Apache from glomming onto all bound IP addresses.  
#  
#Listen 12.34.56.78:80  
Listen 8927  
  
#  
# Dynamic Shared Object (DSO) Support  
#  
# To be able to use the functionality of a module which was built as a DSO you  
# have to place corresponding `LoadModule' lines at this location so the  
# directives contained in it are actually available _before_ they are used.  
# Statically compiled modules (those listed by `httpd -l') do not need  
# to be loaded here.  
#  
# Example:  
# LoadModule foo_module modules/mod_foo.so  
#  
LoadModule mpm_prefork_module libexec/apache2/mod_mpm_prefork.so  
#LoadModule mpm_worker_module libexec/apache2/mod_mpm_worker.so  
  
###php8  
#See  https://github.com/termux/termux-packages/issues/6084  
  
LoadModule php_module libexec/apache2/libphp.so  
  
  
LoadModule authn_file_module libexec/apache2/mod_authn_file.so  
#LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so  
#LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so  
#LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so  
#LoadModule authn_socache_module libexec/apache2/mod_authn_socache.so  
LoadModule authn_core_module libexec/apache2/mod_authn_core.so  
LoadModule authz_host_module libexec/apache2/mod_authz_host.so  
LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so  
LoadModule authz_user_module libexec/apache2/mod_authz_user.so  
#LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so  
#LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so  
#LoadModule authz_dbd_module libexec/apache2/mod_authz_dbd.so  
LoadModule authz_core_module libexec/apache2/mod_authz_core.so  
#LoadModule authnz_fcgi_module libexec/apache2/mod_authnz_fcgi.so  
LoadModule access_compat_module libexec/apache2/mod_access_compat.so  
LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so  
#LoadModule auth_form_module libexec/apache2/mod_auth_form.so  
#LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so  
#LoadModule allowmethods_module libexec/apache2/mod_allowmethods.so  
#LoadModule file_cache_module libexec/apache2/mod_file_cache.so  
#LoadModule cache_module libexec/apache2/mod_cache.so  
#LoadModule cache_disk_module libexec/apache2/mod_cache_disk.so  
#LoadModule cache_socache_module libexec/apache2/mod_cache_socache.so  
#LoadModule socache_shmcb_module libexec/apache2/mod_socache_shmcb.so  
#LoadModule socache_dbm_module libexec/apache2/mod_socache_dbm.so  
#LoadModule socache_memcache_module libexec/apache2/mod_socache_memcache.so  
#LoadModule socache_redis_module libexec/apache2/mod_socache_redis.so  
#LoadModule watchdog_module libexec/apache2/mod_watchdog.so  
#LoadModule macro_module libexec/apache2/mod_macro.so  
#LoadModule dbd_module libexec/apache2/mod_dbd.so  
#LoadModule dumpio_module libexec/apache2/mod_dumpio.so  
#LoadModule echo_module libexec/apache2/mod_echo.so  
#LoadModule buffer_module libexec/apache2/mod_buffer.so  
#LoadModule data_module libexec/apache2/mod_data.so  
#LoadModule ratelimit_module libexec/apache2/mod_ratelimit.so  
LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so  
#LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so  
#LoadModule request_module libexec/apache2/mod_request.so  
LoadModule include_module libexec/apache2/mod_include.so  
LoadModule filter_module libexec/apache2/mod_filter.so  
#LoadModule reflector_module libexec/apache2/mod_reflector.so  
#LoadModule substitute_module libexec/apache2/mod_substitute.so  
#LoadModule sed_module libexec/apache2/mod_sed.so  
#LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so  
#LoadModule deflate_module libexec/apache2/mod_deflate.so  
LoadModule mime_module libexec/apache2/mod_mime.so  
LoadModule log_config_module libexec/apache2/mod_log_config.so  
#LoadModule log_debug_module libexec/apache2/mod_log_debug.so  
#LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so  
#LoadModule logio_module libexec/apache2/mod_logio.so  
LoadModule env_module libexec/apache2/mod_env.so  
#LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so  
#LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so  
#LoadModule expires_module libexec/apache2/mod_expires.so  
LoadModule headers_module libexec/apache2/mod_headers.so  
#LoadModule ident_module libexec/apache2/mod_ident.so  
#LoadModule usertrack_module libexec/apache2/mod_usertrack.so  
#LoadModule unique_id_module libexec/apache2/mod_unique_id.so  
LoadModule setenvif_module libexec/apache2/mod_setenvif.so  
LoadModule version_module libexec/apache2/mod_version.so  
#LoadModule remoteip_module libexec/apache2/mod_remoteip.so  
#LoadModule proxy_module libexec/apache2/mod_proxy.so  
#LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so  
#LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so  
#LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so  
#LoadModule proxy_fcgi_module libexec/apache2/mod_proxy_fcgi.so  
#LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so  
#LoadModule proxy_uwsgi_module libexec/apache2/mod_proxy_uwsgi.so  
#LoadModule proxy_fdpass_module libexec/apache2/mod_proxy_fdpass.so  
#LoadModule proxy_wstunnel_module libexec/apache2/mod_proxy_wstunnel.so  
#LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so  
#LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so  
#LoadModule proxy_express_module libexec/apache2/mod_proxy_express.so  
#LoadModule proxy_hcheck_module libexec/apache2/mod_proxy_hcheck.so  
#LoadModule session_module libexec/apache2/mod_session.so  
#LoadModule session_cookie_module libexec/apache2/mod_session_cookie.so  
#LoadModule session_dbd_module libexec/apache2/mod_session_dbd.so  
LoadModule slotmem_shm_module libexec/apache2/mod_slotmem_shm.so  
#LoadModule slotmem_plain_module libexec/apache2/mod_slotmem_plain.so  
#LoadModule ssl_module libexec/apache2/mod_ssl.so  
#LoadModule dialup_module libexec/apache2/mod_dialup.so  
#LoadModule http2_module libexec/apache2/mod_http2.so  
#LoadModule lbmethod_byrequests_module libexec/apache2/mod_lbmethod_byrequests.so  
#LoadModule lbmethod_bytraffic_module libexec/apache2/mod_lbmethod_bytraffic.so  
#LoadModule lbmethod_bybusyness_module libexec/apache2/mod_lbmethod_bybusyness.so  
#LoadModule lbmethod_heartbeat_module libexec/apache2/mod_lbmethod_heartbeat.so  
LoadModule unixd_module libexec/apache2/mod_unixd.so  
#LoadModule heartbeat_module libexec/apache2/mod_heartbeat.so  
#LoadModule heartmonitor_module libexec/apache2/mod_heartmonitor.so  
#LoadModule dav_module libexec/apache2/mod_dav.so  
LoadModule status_module libexec/apache2/mod_status.so  
LoadModule autoindex_module libexec/apache2/mod_autoindex.so  
#LoadModule asis_module libexec/apache2/mod_asis.so  
#LoadModule info_module libexec/apache2/mod_info.so  
#LoadModule suexec_module libexec/apache2/mod_suexec.so  
<IfModule !mpm_prefork_module>  
	#LoadModule cgid_module libexec/apache2/mod_cgid.so  
</IfModule>  
<IfModule mpm_prefork_module>  
	#LoadModule cgi_module libexec/apache2/mod_cgi.so  
</IfModule>  
#LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so  
#LoadModule dav_lock_module libexec/apache2/mod_dav_lock.so  
#LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so  
LoadModule negotiation_module libexec/apache2/mod_negotiation.so  
LoadModule dir_module libexec/apache2/mod_dir.so  
#LoadModule imagemap_module libexec/apache2/mod_imagemap.so  
#LoadModule actions_module libexec/apache2/mod_actions.so  
#LoadModule speling_module libexec/apache2/mod_speling.so  
LoadModule userdir_module libexec/apache2/mod_userdir.so  
LoadModule alias_module libexec/apache2/mod_alias.so  
#LoadModule rewrite_module libexec/apache2/mod_rewrite.so  
  
<IfModule unixd_module>  
#  
# If you wish httpd to run as a different user or group, you must run  
# httpd as root initially and it will switch.    
#  
# User/Group: The name (or #number) of the user/group to run httpd as.  
# It is usually good practice to create a dedicated user and group for  
# running httpd, as with most system services.  
#  
#User daemon  
#Group daemon  
  
</IfModule>  
  
# 'Main' server configuration  
#  
# The directives in this section set up the values used by the 'main'  
# server, which responds to any requests that aren't handled by a  
# <VirtualHost> definition.  These values also provide defaults for  
# any <VirtualHost> containers you may define later in the file.  
#  
# All of these directives may appear inside <VirtualHost> containers,  
# in which case these default settings will be overridden for the  
# virtual host being defined.  
#  
  
#  
# ServerAdmin: Your address, where problems with the server should be  
# e-mailed.  This address appears on some server-generated pages, such  
# as error documents.  e.g. [email protected]  
#  
ServerAdmin [email protected]  
  
#  
# ServerName gives the name and port that the server uses to identify itself.  
# This can often be determined automatically, but we recommend you specify  
# it explicitly to prevent problems during startup.  
#  
# If your host doesn't have a registered DNS name, enter its IP address here.  
#  
ServerName 127.0.0.1:8927  
  
#  
# Deny access to the entirety of your server's filesystem. You must  
# explicitly permit access to web content directories in other   
# <Directory> blocks below.  
#  
<Directory />  
    AllowOverride none  
    Require all denied  
</Directory>  
  
#  
# Note that from this point forward you must specifically allow  
# particular features to be enabled - so if something's not working as  
# you might expect, make sure that you have specifically enabled it  
# below.  
#  
  
#  
# DocumentRoot: The directory out of which you will serve your  
# documents. By default, all requests are taken from this directory, but  
# symbolic links and aliases may be used to point to other locations.  
#  
  
  
#DocumentRoot "/data/data/com.termux/files/usr/share/apache2/default-site/htdocs"  
#<Directory "/data/data/com.termux/files/usr/share/apache2/default-site/htdocs">  
DocumentRoot "/storage/emulated/0/localhost"  
<Directory "/storage/emulated/0/localhost">  
    #  
    # Possible values for the Options directive are "None", "All",  
    # or any combination of:  
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews  
    #  
    # Note that "MultiViews" must be named *explicitly* --- "Options All"  
    # doesn't give it to you.  
    #  
    # The Options directive is both complicated and important.  Please see  
    # http://httpd.apache.org/docs/2.4/mod/core.html#options  
    # for more information.  
    #  
    Options Indexes FollowSymLinks  
  
    #  
    # AllowOverride controls what directives may be placed in .htaccess files.  
    # It can be "All", "None", or any combination of the keywords:  
    #   AllowOverride FileInfo AuthConfig Limit  
    #  
    AllowOverride None  
  
    #  
    # Controls who can get stuff from this server.  
    #  
    Require all granted  
</Directory>  
  
#  
# DirectoryIndex: sets the file that Apache will serve if a directory  
# is requested.  
#  
#<IfModule dir_module>  
 #   DirectoryIndex index.html  
#</IfModule>  
  
  
<FilesMatch \.php$>   
   SetHandler application/x-httpd-php  
</FilesMatch>  
  
<IfModule dir_module>  
    DirectoryIndex index.html index.htm index.php  
</IfModule>  
  
  
#  
# The following lines prevent .htaccess and .htpasswd files from being   
# viewed by Web clients.   
#  
<Files ".ht*">  
    Require all denied  
</Files>  
  
#  
# ErrorLog: The location of the error log file.  
# If you do not specify an ErrorLog directive within a <VirtualHost>  
# container, error messages relating to that virtual host will be  
# logged here.  If you *do* define an error logfile for a <VirtualHost>  
# container, that host's errors will be logged there and not here.  
#  
ErrorLog "var/log/apache2/error_log"  
  
#  
# LogLevel: Control the number of messages logged to the error_log.  
# Possible values include: debug, info, notice, warn, error, crit,  
# alert, emerg.  
#  
LogLevel warn  
  
<IfModule log_config_module>  
    #  
    # The following directives define some format nicknames for use with  
    # a CustomLog directive (see below).  
    #  
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined  
    LogFormat "%h %l %u %t \"%r\" %>s %b" common  
  
    <IfModule logio_module>  
      # You need to enable mod_logio.c to use %I and %O  
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio  
    </IfModule>  
  
    #  
    # The location and format of the access logfile (Common Logfile Format).  
    # If you do not define any access logfiles within a <VirtualHost>  
    # container, they will be logged here.  Contrariwise, if you *do*  
    # define per-<VirtualHost> access logfiles, transactions will be  
    # logged therein and *not* in this file.  
    #  
    CustomLog "var/log/apache2/access_log" common  
  
    #  
    # If you prefer a logfile with access, agent, and referer information  
    # (Combined Logfile Format) you can use the following directive.  
    #  
    #CustomLog "var/log/apache2/access_log" combined  
</IfModule>  
  
<IfModule alias_module>  
    #  
    # Redirect: Allows you to tell clients about documents that used to   
    # exist in your server's namespace, but do not anymore. The client   
    # will make a new request for the document at its new location.  
    # Example:  
    # Redirect permanent /foo http://www.example.com/bar  
  
    #  
    # Alias: Maps web paths into filesystem paths and is used to  
    # access content that does not live under the DocumentRoot.  
    # Example:  
    # Alias /webpath /full/filesystem/path  
    #  
    # If you include a trailing / on /webpath then the server will  
    # require it to be present in the URL.  You will also likely  
    # need to provide a <Directory> section to allow access to  
    # the filesystem path.  
  
    #  
    # ScriptAlias: This controls which directories contain server scripts.   
    # ScriptAliases are essentially the same as Aliases, except that  
    # documents in the target directory are treated as applications and  
    # run by the server when requested rather than as documents sent to the  
    # client.  The same rules about trailing "/" apply to ScriptAlias  
    # directives as to Alias.  
    #  
    ScriptAlias /cgi-bin/ "/data/data/com.termux/files/usr/lib/cgi-bin/"  
  
</IfModule>  
  
<IfModule cgid_module>  
    #  
    # ScriptSock: On threaded servers, designate the path to the UNIX  
    # socket used to communicate with the CGI daemon of mod_cgid.  
    #  
    #Scriptsock cgisock  
</IfModule>  
  
#  
# "/data/data/com.termux/files/usr/lib/cgi-bin" should be changed to whatever your ScriptAliased  
# CGI directory exists, if you have that configured.  
#  
<Directory "/data/data/com.termux/files/usr/lib/cgi-bin">  
    AllowOverride None  
    Options None  
    Require all granted  
</Directory>  
  
<IfModule headers_module>  
    #  
    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied  
    # backend servers which have lingering "httpoxy" defects.  
    # 'Proxy' request header is undefined by the IETF, not listed by IANA  
    #  
    RequestHeader unset Proxy early  
</IfModule>  
  
<IfModule mime_module>  
    #  
    # TypesConfig points to the file containing the list of mappings from  
    # filename extension to MIME-type.  
    #  
    TypesConfig etc/apache2/mime.types  
  
    #  
    # AddType allows you to add to or override the MIME configuration  
    # file specified in TypesConfig for specific file types.  
    #  
    #AddType application/x-gzip .tgz  
    #  
    # AddEncoding allows you to have certain browsers uncompress  
    # information on the fly. Note: Not all browsers support this.  
    #  
    #AddEncoding x-compress .Z  
    #AddEncoding x-gzip .gz .tgz  
    #  
    # If the AddEncoding directives above are commented-out, then you  
    # probably should define those extensions to indicate media types:  
    #  
    AddType application/x-compress .Z  
    AddType application/x-gzip .gz .tgz  
  
    #  
    # AddHandler allows you to map certain file extensions to "handlers":  
    # actions unrelated to filetype. These can be either built into the server  
    # or added with the Action directive (see below)  
    #  
    # To use CGI scripts outside of ScriptAliased directories:  
    # (You will also need to add "ExecCGI" to the "Options" directive.)  
    #  
    #AddHandler cgi-script .cgi  
  
    # For type maps (negotiated resources):  
    #AddHandler type-map var  
  
    #  
    # Filters allow you to process content before it is sent to the client.  
    #  
    # To parse .shtml files for server-side includes (SSI):  
    # (You will also need to add "Includes" to the "Options" directive.)  
    #  
    #AddType text/html .shtml  
    #AddOutputFilter INCLUDES .shtml  
</IfModule>  
  
#  
# The mod_mime_magic module allows the server to use various hints from the  
# contents of the file itself to determine its type.  The MIMEMagicFile  
# directive tells the module where the hint definitions are located.  
#  
#MIMEMagicFile etc/apache2/magic  
  
#  
# Customizable error responses come in three flavors:  
# 1) plain text 2) local redirects 3) external redirects  
#  
# Some examples:  
#ErrorDocument 500 "The server made a boo boo."  
#ErrorDocument 404 /missing.html  
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"  
#ErrorDocument 402 http://www.example.com/subscription_info.html  
#  
  
#  
# MaxRanges: Maximum number of Ranges in a request before  
# returning the entire resource, or one of the special  
# values 'default', 'none' or 'unlimited'.  
# Default setting is to accept 200 Ranges.  
#MaxRanges unlimited  
  
#  
# EnableMMAP and EnableSendfile: On systems that support it,   
# memory-mapping or the sendfile syscall may be used to deliver  
# files.  This usually improves server performance, but must  
# be turned off when serving from networked-mounted   
# filesystems or if support for these functions is otherwise  
# broken on your system.  
# Defaults: EnableMMAP On, EnableSendfile Off  
#  
#EnableMMAP off  
#EnableSendfile on  
  
# Supplemental configuration  
#  
# The configuration files in the etc/apache2/extra/ directory can be   
# included to add extra features or to modify the default configuration of   
# the server, or you may simply copy their contents here and change as   
# necessary.  
  
# Server-pool management (MPM specific)  
#Include etc/apache2/extra/httpd-mpm.conf  
  
# Multi-language error messages  
#Include etc/apache2/extra/httpd-multilang-errordoc.conf  
  
# Fancy directory listings  
#Include etc/apache2/extra/httpd-autoindex.conf  
  
# Language settings  
#Include etc/apache2/extra/httpd-languages.conf  
  
# User home directories  
#Include etc/apache2/extra/httpd-userdir.conf  
  
# Real-time info on requests and configuration  
#Include etc/apache2/extra/httpd-info.conf  
  
# Virtual hosts  
#Include etc/apache2/extra/httpd-vhosts.conf  
  
# Local access to the Apache HTTP Server Manual  
#Include etc/apache2/extra/httpd-manual.conf  
  
# Distributed authoring and versioning (WebDAV)  
#Include etc/apache2/extra/httpd-dav.conf  
  
# Various default settings  
#Include etc/apache2/extra/httpd-default.conf  
  
# Configure mod_proxy_html to understand HTML4/XHTML1  
<IfModule proxy_html_module>  
Include etc/apache2/extra/proxy-html.conf  
</IfModule>  
  
# Secure (SSL/TLS) connections  
#Include etc/apache2/extra/httpd-ssl.conf  
#  
# Note: The following must must be present to support  
#       starting without SSL on platforms with no /dev/random equivalent  
#       but a statically compiled-in mod_ssl.  
#  
<IfModule ssl_module>  
SSLRandomSeed startup builtin  
SSLRandomSeed connect builtin  
</IfModule>  
  
#  
#  Load config files from the config directory 'conf.d'.  
#  
Include etc/apache2/conf.d/*.conf